Need help with 11-inch rough-in toilets? Toilets for 11-inch rough-in

Are you looking for the best 11-inch rough-in toilets and didn’t find the right one? We understand. As you know, the standard rough-in size for toilets is 12 inches. Therefore, most of the toilet manufacturers make 12-inch rough-in toilets. Besides, few models of 10-inch rough-in toilets and 14-inch rough-in toilets are also available.

Unfortunately, there is no 11-inch rough-in toilet. So, if you have an 11-inch rough-in for your toilet then, what are the options available for you? What can you do to resolve the issue?

This article of ours deals with the same topic. If the rough-in for your toilet is 11-inches (measured from the wall to the center of the bowl) and you are searching toilets for 11-inch rough-in then, you came to the right place on the internet.

This guide of ours for 11-inch rough-in toilets will help you deal with the problem. We will give you the names of the best toilets for 11-inch rough-in. Along with the list of toilets for 11-inch rough-in, you will also get the best solutions to replace 11-inch rough-in toilets.

To know more, you have to read the article till the end. So, let us get started.

Best solutions for 11-inch rough-in toilets|Toilets for 11-inch rough-in

We will provide you four of the best solutions for 11-inch rough-in toilets. With the help of these solutions, you can deal with the 11″ rough-in scenario. In this section, you will also get the names of the best toilets for 11-inch rough-in.

With that said, the following are the solutions for 11-inch rough-in toilets.

1- Use 12-Inch Rough-in Toilets for 11-Inch Rough-In

There are some 12-inch rough-in toilet models that can be installed on a toilet with an 11-inch rough-in size. These toilets are categorized as some of the best toilets for 11-inch rough-in sizes.

Similarly, these toilets are good for the 11.25-inch rough-in size and even the 11.5-inch rough-in size. That’s because when these 12-inch rough-in toilets are installed, they leave a gap of one inch or more between the tank and the wall. As a result, you can install them on 11-inch rough-in size.

Toilets for 11-inch rough-in size are listed below:

1. TOTO Drake Elongated Toilet CST744E (1.6 GPF)

best 11-inch rough-in

TOTO Drake Elongated Toilet CST744E is a popular 12-inch rough-in toilet model. Although it is a 12-inch rough-in model, yet it is also one of the best 11-inch rough-in toilets.

With that said, when they are installed on a 12-inch rough-in they have a 1 3/8 inch clearance at the base and 1-inch clearance at tank level from the wall. The TOTO Drake Two-Piece Elongated 1.6 GPF Toilet offers a high-profile design and is powerful & durable as well.

Moreover, they are the toilets for 11-inch rough-in that utilizes TOTO’s G-Max® flushing system. It features a 3-inch wide flush valve, extra-large siphon jet, and a large trapway.

This 11-inch rough-in toilet generates a powerful flush with 1.6 gallons of water. It has pretty good online ratings and reviews. The reviews report that the flushing of this toilet is praiseworthy. A lot of users mentioned the toilet cleans the waste quite well in just one flush.

So, one thing is for sure that the TOTO Drake Elongated Toilet CST744E is a powerful 1-flush toilet. And surprisingly it isn’t that noisy as well. But it doesn’t come with a toilet seat you have to buy one separately.

2. TOTO Drake ADA-Height Elongated Toilet CST744SL (1.6 GPF)

best toilets for 11-inch rough-in

TOTO CST744SL#01 Drake is a single flush elongated two-piece comfort height toilet that is suitable for 11-inch rough-in. These 11-inch rough-in toilets are ADA-compliant and possess a height of 16.5 inches. This height is from the base of the toilet to the top of the toilet bowl, without a seat. And when you add a seat, these become 18 inch high toilets. TOTO CST744SL#01 Drake comes without a toilet seat, so you have to buy it separately.

Moreover, these toilets for 11-inch rough-in are designed in such a way that they are powerful enough for both residential as well as commercial applications. This ADA-compliant toilet uses Toto G-max flushing technology consisting of a large flush, an extra-large siphon jet, and a 2-1/8 inch fully glazed trap way.

This drives a large amount of water into the toilet bowl very fast resulting in a powerful flush. Apart from this, an elongated toilet bowl would be a good option to match this comfort height toilet.

One drawback that TOTO CST744SL#01 Drake has is, it uses 1.6 gallons of water per flush. Hence it is not WaterSense certified. So, it can not be sold in places like California. Meanwhile, this TOTO CST744SL#01 Drake comfort height toilet model comes with a 1-year warranty.

3. American Standard Cadet 3 Concealed Trapway Toilet (1.28 GPF)

11-inch rough-in

Maybe the only toilet from American Standard in the 12-inch rough-in category that fits on 11″ rough-in is the American Standard Cadet 3. According to the specifications of these 11-inch rough-in toilets, Cadet 3 has a 4″clearance at the base and 1 1/8″ at the top, which allows you to install it on an 11-inch rough.

The 11-inch rough-in toilet features a smooth-sided concealed trap way that eliminates curves and crevices for easy cleaning. Moreover, unlike elongated toilets, round-front toilets occupy less space in the bathroom. And since the American Standard Cade 3 FloWise is a round-front toilet, it would be great to have it in a bathroom with a small space.

On the other hand, these toilets for 11-inch rough-in are coated with American Standard’s EverClean additive, which eventually prevents the growth of mold and bacteria. It thus keeps your toilet shiny and clean for a longer period.

Moreover, the American Standard Cadet 3 FloWise is WaterSense certified and uses only 1.28 gallons of water per flush. So, it can be sold anywhere in the U.S., including California. The good thing is that a soft-close toilet seat comes along with it when you buy this product. In short, these 11-inch rough-in toilets bring power, performance, and comfort to even the smallest bathroom.

4. TOTO CST744E#01 Drake (1.28 GPF)

toilet for 11-inch rough-in

The next one on our list of the best 11-inch rough-in toilets is the TOTO CST744E#01 Drake. This toilet possesses a high-profile design. It is powerful and durable enough to be used for both residential and commercial applications.

These toilets for 11-inch rough-in uses TOTO’s EMAX flushing system, which features a 3” wide flush valve, extra-large siphon jet, and a large trapway. The TOTO Eco Drake Two-Piece Elongated toilet is a high-efficiency toilet that generates a powerful flush and uses only 1.28 GPF.

Consequently, it makes water conservation easy by using 1.28 gallons of water per flush. Moreover, its large siphon jet offers increased flow. It thus results in creating a powerful yet quiet flush.

On the other hand, the high-profile and concealed design of this 11-inch rough-in toilet creates a sleek and smooth look. It also makes cleaning easier. To sum up, the Eco Drake meets the standards for EPA WaterSense California’s CEC and CALGreen requirements and is one of the best toilets for 11-inch rough-in.

5. Kohler Cimarron K-3619 One-Piece Toilet

best 11-inch rough-in toilets

Kohler is a renowned toilet manufacturer and Kohler Cimarron K-3619 One-Piece Toilet is one of the best 11-inch rough-in toilets available for you. It is a one-piece toilet that features a convenient chair-like height and an elongated bowl for comfortable use.

These toilets for 11-inch rough-in have a toilet bowl height of 16.5 inches (without the toilet seat). And with the toilet seat attached, the total height comes around 17.5 inches. Cimarron K-3619 comes with a toilet seat, so you won’t need to buy one separately. Moreover, these toilets are available in Round bowl and Elongated bowl options, in which elongated bowl offers added room and more comfort.

The flushing system of this Kohler Cimarron is very effective and powerful. This 11-inch rough-in toilet features AquaPiston technology that delivers a fast, powerful, and plug-free flush. Furthermore, the AquaPiston Canister Flush Valve allows the water to flow into the bowl from all sides (360 degrees). Consequently, increasing the power and effectiveness of the flush.

The DryLock installation system of this toilet is fast and foolproof. It is designed in a way that the toilet tank has no bolt holes. It also prevents the leaking caused during the standard installation. Meanwhile, these are comfort height toilets and have a rating of 1.28 GPF thus are WaterSense certified.

2- Use 10-Inch Rough-in Toilets for 11-Inch Rough-In

Installing 10-inch rough-in toilets on 11-inch rough-in is a better option than installing 12-inch inch rough-in toilets. The reason is when you install a 10-inch rough-in toilet (that fits exactly on 10″ inch rough-in) on 11-inch rough-in, it will give you a back clearance of only 1″ which is not too big.

The 10-inch rough-in toilets that will also be good for 11-inch rough-in are mentioned as follows.

1. American Standard 221CB004.020 Colony 2-Piece Elongated Toilet

American Standard 221CB104.020 Colony 1.28 GPF 2 Piece Elongated Toilet with 10 In Rough In White

American Standard 221CB004.020 Colony 2-Piece Elongated Toilet is probably the only 10-inch rough-in toilet model that will have the shortest tank-wall gap. Its specification states that it leaves a 1/2 inch gap when installed on a perfect 10-inch rough-in.

Whereas, when installed on an 11-inch rough-in, it will leave a gap of 1.5 inches. Although it falls under the 10-inch rough-in category, you can install it on an 11-inch rough. It is probably one of the best 11-inch rough-in toilets in the 10-inch rough-in category.

These toilets for 11-inch rough-in consist of an elongated toilet bowl. The elongated bowl is there to add more comfort. Moreover, this 11-inch rough-in toilet is constructed of vitreous china, which is strong and durable.

In addition, it has a low-flow water consumption rate that allows the toilet to save water without sacrificing performance. On the other hand, its PowerWash rim scrubs the toilet bowl with each flush.

3- Make Use Of an Offset Commode Flange

One of the best and easy ways to cure the problem of 11-inch rough-in toilets is using a 1 or 2-inch offset commode flange. You can change the drainage pipe outlet of your existing commode flange with the 1-inch or 2-inch offset commode flange.

Commode Flange is the drain outlet connection accessory/device on the floor, the commode is bolted into it. You will currently have a conventional commode flange shaft that extends just below the surface of the floor to connect to the primary toilet/sewer drain pipeline.

To cope with the situation for 8-inch rough-in toilets or 9-inch rough-in toilets, or 11-inch rough-in toilets, you are required to get an offset commode flange with a 1 or 2 inch balancing out capacity. With that being said, the offset commode flange will help you move the center even more from the wall surface by one or two inches.

As a result, you can increase the rough-in size. It allows you to buy and install 10-inch rough-in toilets like the 10-inch Toto Drake toilet or go for the 12-inch rough-in toilets listed above.

4- Wall Renovation

Another way to deal with toilets for 11-inch rough-in situation is to renovate your wall. In this way, you can increase the distance between the toilet’s drain and the wall surface.

Depending on the rough-in size you have, you will need to relocate the wall back 1 or 2 inches to accommodate 10″ rough-in toilets or 12-inch rough-in toilets.

If you want to do it on your own without any professional assistance then, we have to mention here that you can only move non-load-bearing walls (also called dividing wall surfaces or partition walls) without any professional help. But still, we will suggest you seek professional assistance for the work.

Final thoughts

These were our best 11-inch rough-in toilets. Along with that, we have also provided few solutions to replace 11-inch rough-in toilets. With the help of these solutions, you can deal with the uncommon rough-in scenario.

Unfortunately, there is no 11-inch rough-in toilet. So, if you have an 11-inch rough-in for your toilet then, what are the options available for you?

The standard rough-in size for the toilets is 12 inches. Along with that, few models of 10-inch rough-in toilets and 14-inch rough-in toilets are also available. But what will you do if you have an 11-inch rough-in?… Well, you know that by now.

After hours of research, we have prepared this article. We hope the solutions that we have provided here for the toilets for 11-inch rough-in will help you cope with the situation.

And please feel free to share your thoughts in the comment section below.

Check this too: Best solutions for 8-inch and 9-inch rough-in toilets

Best Solutions for 8-inch and 9-inch rough-in toilets

 

 

Leave a Comment