How to Get Rid of A Toilet Ring in 8 Simple Ways

Toilet bowls discolor for a variety of causes that have nothing to do with housekeeping quality. In most situations, the toilet ring is caused by hard water conditions combined with water standing in a rarely used toilet.

While there are several commercial treatments on the market that claim to eliminate hard water stains in the toilet, common household pantry items can be just as effective and much cheaper in removing the dreaded toilet ring without the use of harsh chemicals.

One of the most uncomfortable items to clean in the house is the toilet. However, cleaning your toilet at least once a week is essential to limiting germs, bacteria, smells, and unsightly traces of filth. This includes the obnoxious ring in the toilet bowl.

We’ll go through a couple of alternative methods for removing the toilet bowl ring. So the next time you go to the restroom, it will be a lot more peaceful and clean experience.

What is the Cause of a Toilet Ring?

Mineral deposits and hard water are the most frequent causes of rust-colored toilet bowl stains. Mold might appear as green, orange, or black streaks or rings. Serratia marcescens is a pink-colored bacterium.

Bacteria and mold, as well as hard water, are common causes of the ring in the toilet bowl. Yellow stains on toilet bowls can be caused by a lack of upkeep in some circumstances. The yellow discoloration is unavoidable when your toilet bowl is exposed to pee for a lengthy period of time. You may avoid this by ensuring that the toilet is flushed after each use.

Hard water

Hard water is defined as water that has an excess of sediments and minerals such as calcium and magnesium. As you continue to use your fixtures and appliances, hard water can accumulate and create rust and scale stains that appear impossible to clean. Toilet bowls are particularly vulnerable since they contain standing water. Thus a ring-like rust is formed in the bowl.

Bacteria and mold

Bacteria and mold are caused by a buildup of germs or fungus in the water that adheres to the toilet bowl. When bacteria grow in a moist environment, it multiplies, exacerbating the toilet bowl ring.

Serratia marcescens, in particular, is responsible for the pink ring in your toilet bowl. These bacteria prefer to thrive in regions with fatty substances, such as feces, which is why it is usually found in toilet bowls. However, it may also be found in the bathroom, shower, and sink.

8 Ways to Get Rid of a Toilet Ring

Under most circumstances, weekly cleaning avoids excessive stain buildup and decreases the visibility of any existing stains. It allows the bowl to appear spotless and white once more. What if none of that works? Don’t worry, I’ve got the answers here.

1. Toilet Cleaners

If the toilet ring is not old and neglected, it may be removed using an abrasive sponge. Put on rubber gloves, load the sponge with any household cleansers, and begin rubbing. After you’ve removed the stains, flush the toilet.

You can also use calcium, lime, and rust remover to get rid of hard water stains. This is a very effective method and will not scratch the porcelain.

2. Bleach

Begin by cleaning the toilet bowl as you normally would. To remove grime and possibly lighten the toilet ring, use a regular toilet bowl cleaner. After you’ve scrubbed the inside of the toilet bowl with a toilet brush, thoroughly rinse it with water.

Pour 1 cup of liquid chlorine bleach into the toilet bowl with care. If you’re attempting to get rid of mold or germs, let it rest for 30 minutes. Remember that the longer you soak the toilet ring in the bleach solution, the more effective it will be at breaking down those hardened stains.

However, cleaners containing bleach should be avoided since, believe it or not, they can make this type of stain permanent. Using a toilet brush, scrub the interior of the toilet thoroughly. Make careful to leave enough room under the rim. To remove the bleach, flush the toilet.

Rinse the toilet with 2-3 buckets of water before flushing to keep the inside of your porcelain toilet looking shiny and new for as long as possible.

3. Vinegar and baking soda

When used strategically, these two popular, non-toxic, and innocuous culinary products are effective at cleaning hard water stains and toilet rings.

Pour 1 cup of regular white vinegar into the toilet bowl. Swish it about with a toilet brush. Allow it to settle for about a minute. Pour a cup of baking soda into the toilet bowl, followed by another two cups of vinegar. Prepare yourself since this will cause a fizzing motion. Allow it to sit for about 10 minutes.

Swish the toilet brush some more to ensure that the solution reaches spots above the waterline and beneath the rim. However, do not flush. Allow the solution to remain for 30 minutes, swishing regularly, until the spots have disappeared. Scrub any remaining stains with a toilet brush or scrubby sponge. To rinse, flush the toilet.

4. Borax and vinegar

Borax is a more powerful, yet widely available, multi-purpose cleaning chemical that may be used to remove hard water stains from the toilet. Borax is available in most supermarkets’ laundry aisles, online, and at retailers.

Fill the toilet bowl with 1/4 cup borax and swirl it around with a toilet brush. Add 1 cup of vinegar, stir it around again, and let aside for about 20 minutes. To be successful, the cleaning solution must be moist on the surface for as long as possible, thus you may need to spray the toilet ring 2-3 times every 5 minutes.

Borax may be made into a thick paste by mixing it with a small amount of water. Coat the toilet brush with the paste to make a minimally abrasive scrape, and then use it to clean the area around the toilet bowl. To remove the stains, scrape the bowl with a toilet brush.

Pour a pail of clean water over the inside of the bowl to remove any residue before flushing 1-2 times to fully cleanse it. Borax is widely accessible and inexpensive in most stores. All you have to do is mix the product into a cleaning spray and apply it to remove toilet rings as needed.

5. Denture tablet

The cleaning chemical in denture tablets works nicely on porcelain fixtures. Put a denture pill in the toilet. Allow it to fizzle for at least 30 minutes, if not overnight. Remove difficult stains with a toilet brush, flush, and enjoy the clean white toilet.

6. Degreaser

This method is effective on most types of toilet rings, especially if the area is cleaned on a regular basis. Brushes with long handles or short scrubbing ends can assist you in reaching every area of your toilet bowl.

Spray a general-purpose household degreaser inside the toilet bowl before cleaning it. This will aid in the breakdown of the stain before scrubbing it away later. Allow the degreaser to sit for 15 minutes before proceeding with the cleaning method.

Scrub the toilet ring with regular dish soap or baking soda on the wet bristles of your toilet brush. Stubborn stains may necessitate a little more elbow grease, so don’t be afraid to exert some pressure.

To remove traces of the degreaser and cleaning agents, rinse and scrub the bowl interior one last time before flushing the toilet 2-3 times.

7. Magic Eraser

There are various applications for this amazing product. One of them is taking off the toilet ring. The method is not difficult, but it requires some planning ahead of time.

Allow a piece of Magic Eraser to float in the bowl overnight. Don’t use the restroom till the morning. The toilet ring will have vanished by then.

Because your Magic Eraser floats, you can’t flush it. Before flushing the toilet, fish it out. You can place a piece of this product into the toilet tank to prevent the formation of new toilet rings. You will clean your bowl every time you flush in this manner.

8. Pumice Stone for Extreme Cases

Certain stains and toilet rings are so obstinate, that they are beyond the reach of baking soda, borax, vinegar, or bleach.

A pumice stone is the solution. You most likely use a pumice stone to exfoliate dead skin cells from your feet. This natural volcanic granite appears to be the greatest alternative for removing the toilet ring as well.

Put on protective gloves and take on a classic pumice stone. Submerge it in water for around 15 minutes to soften it before commencing to scrape. Then, in the bowl, begin stroking a toilet ring. If you soften the pumice stone enough, it will work like a pencil eraser.

Before flushing the toilet, be certain that all traces of the ring have been removed. Overuse, or using the improper type of pumice substance, might harm the surface of the vitreous china toilet bowl. Careful, infrequent usage, on the other hand, is like magic.

Preventive measures

Clean regularly

To avoid hard water toilet stains, you do not need to use harsh or expensive chemicals. When applied on a daily basis, borax, baking soda, and vinegar perform an excellent job of cleaning and disinfecting—as well as preventing hard water stains from forming.

Easy maintenance

Do the following regularly or as needed for routine maintenance and to help maintain your toilet clean and free of hard water buildup:

Before going to bed at night, pour 1 cup of borax into your toilet bowl. Apply it to the bowl’s sides, beneath the rim, and within the bowl itself. Scrub rapidly with a brush and flush in the morning. The borax loosens everything visible and invisible, making the scrub time considerably shorter. Toilet rings, smells, and stains will be simply and quickly flushed away.

Frequently Asked Questions (FAQs)

Does WD 40 remove toilet rings?

According to the manufacturer, WD40 may be used to remove toilet rings. Spray the WD40 onto the ring to soften the rust and lime deposits, making them easier to scrape away. However, I would advise using only a little amount since WD-40 warns against flushing it down the toilet.

Will Coke clean a toilet ring?

While coke is an effective toilet cleaner, it may not be the best for hard water stains. However, if the toilet ring is not old, 20l of Coca-Cola bottles can do the trick. You must pour the beverage into the bowl. After that, wrap the bowl with plastic wrap and set it aside for an hour. The pressure created by the foil and Coca-Cola will clean the stains.

Can you leave baking soda and vinegar in the toilet overnight?

If the stains are extra stubborn, yes you can. Vinegar is a milder cleaning agent than the chemical cleaners available on the market. It does not harm the ceramic surface of the toilet even if you leave it in the bowl overnight. Bleach on the other hand can damage the rubber seals inside the toilet if used in excess.

Final Words

You will most likely be challenged with removing toilet rings as a result of a lack of cleaning or stagnant hard water that has left mineral deposits and discoloration within your toilet. Fortunately, there are a few simple and efficient methods for removing toilet rings and preventing them from forming in the first place.

In addition to cleaning your toilet bowl on a regular basis using one of the ways described above, brush and rinse the interior of your bowl after each use. This will just take you a minute or two to do, but it will save you a lot of time in the long run by keeping toilet rings at bay.

Hope the article helps you in getting rid of the stubborn toilet rings. If you put off the work, you risk unpleasant leaks, smells, and even extra damage to the porcelain. The cleaners mentioned are easily available in the market and don’t cost much. If you know of any other effective method, do let me know in the comments.

Leave a Comment