WaterSense toilet guide: what the label certifies, what it saves in five cities, and the picks that clear MaP 800
WaterSense toilet guide: what the label certifies, what it saves in five cities, and the picks that clear MaP 800
By Ariel, last updated September 25, 2026.
A WaterSense toilet is a tank toilet that an independent lab has certified to flush with 1.28 gallons or less and still clear 350 grams of test media. That is the whole promise. It says nothing about whether the toilet will clear what a family actually puts in it, or what the water is worth where you live. The label is a floor, so the questions that decide the purchase are how far above it a toilet flushes, what the water costs on your own utility’s rate sheet, and which rebate will pay for part of it.
Buy the TOTO Drake CST776CEFG unless something rules it out: 1.28 gpf, MaP 1,000, universal height. Take the Niagara Stealth if price decides it and the drain run is short, the Cadet PRO for 1.28 gpf and parts on every shelf, the Aquia IV if a light flush will get used, and the Gilpin for a long, flat drain run.

The WaterSense toilet picks that clear MaP 800
| Toilet | Flush type | GPF | MaP (grams) | Rough-in | Price observed Sept 2026 | Best for |
|---|---|---|---|---|---|---|
| TOTO Drake CST776CEFG | Gravity, single | 1.28 | 1,000 | 12 in (10 in variant) | $346 (Lowe’s) | Most bathrooms |
| TOTO Aquia IV CST446CEMFGN | Gravity, dual | 1.28 / 0.9 | 800 | 12 in (10 or 14 adapter) | $579-$598 | Dual flush that still clears |
| Niagara Stealth N7717 / N7714 | Vacuum-assist, single | 0.8 | 800 | 12 in | $228 (no seat) | Lowest bill, 0.8 gpf rebates |
| American Standard Cadet PRO 215AA104.020 | Gravity, single | 1.28 | 1,000 | 12 in | $304-$317 | Value name-brand |
| PROFLO Gilpin PFGPC412PAUHETWHA | Pressure-assist, single | 1.0 | 1,000 | 12 in (10 in variant) | $554 | Long drain runs |
Prices are September 2026 at the retailer named in each pick, and they move with promotions. Where this guide says a toilet clears, that rests on its published MaP score and the manufacturer’s specification.
What the WaterSense label actually certifies
The EPA WaterSense specification for tank-type toilets caps the flush at 1.28 gallons, 20 percent below the 1.6 gallon federal maximum set by the Energy Policy Act of 1992, and requires a third-party certifier to run four tests: waste extraction, bowl surface cleaning, mixed-media flushability, and drainline transport. Version 2.0 of the specification (May 2024) would drop the averaged effective-volume calculation for dual-flush toilets and cap the full flush at 1.28 gallons, but EPA has paused its effective date and Version 1.2 remains in force, so a 1.6/1.1 gpf dual flush still qualifies on its averaged 1.27 gallons. Judge a dual flush by its full-flush number anyway, because the label does not. Our history of the toilet traces how flush volumes fell from 3.5 gallons.
The waste-extraction test is where the label is weakest. It requires the toilet to clear 350 grams of soybean-paste test media in a single flush. MaP (Maximum Performance) keeps loading the bowl until the toilet fails, up to 1,000 grams, and a toilet that scrapes past 350 gets the same label as one that clears 1,000. MaP’s FAQ calls 500 grams or more exceptional; its MaP PREMIUM tier requires 600 grams at 1.1 gpf or less, or at 1.28 gpf on a dual flush’s full flush. We screen at 800 because those toilets cost the same as the 500 gram ones, and older homes with long horizontal drains are where a light flush leaves residue.
The label also cannot fix a running toilet. A flapper that does not seat can pass more water in a day than three people save in a month by moving from 1.6 to 1.28 gpf, about 145 gallons. Put food coloring in the tank before you spend $304; our running toilet guide covers the $12 fix.

The water-bill math: five cities, current rate sheets
Gallons per flush, times 5.05 flushes per person per day (the EPA WaterSense calculator’s figure), times three people, times 365, divided by 748 for billing units, times the utility’s charge per unit for water plus sewer. That is 5,530 flushes a year, at each utility’s published rate for the tier a three-person household lands in. Atlanta’s 2024-2028 water and sewer rate schedule puts the average household at 8 to 10 units a month, so its column uses the above-6-unit tier. Los Angeles is water only, at LADWP’s Schedule A tier 1, so its column sits below a full bill, and Phoenix includes 3,740 to 5,984 gallons a month inside its base fee, so that column is optimistic for a small household. A $304 Cadet PRO replacing a 3.5 gpf toilet pays back in 0.8 to 2.0 years before any rebate; replacing a working 1.6 gpf toilet, it takes 5.9 years in Atlanta and 13.9 in Phoenix, and a $228 Stealth takes 1.8 to 4.2.
| City and rate source | Water + sewer per 748 gal | 3.5 gpf | 1.6 gpf | 1.28 gpf | 0.8 gpf | Saved, 3.5 to 1.28 | Saved, 1.6 to 1.28 |
|---|---|---|---|---|---|---|---|
| New York City (NYC Water Board) | $13.86 | $359 | $164 | $131 | $82 | $227 | $33 |
| Los Angeles (LADWP), water only | $11.79 | $305 | $140 | $112 | $70 | $194 | $28 |
| Austin (Austin Water) | $14.90 | $386 | $176 | $141 | $88 | $245 | $35 |
| Phoenix (Water Services) | $9.28 | $240 | $110 | $88 | $55 | $152 | $22 |
| Atlanta (Watershed Management, 2024-2028 schedule) | $21.85 | $565 | $258 | $207 | $129 | $359 | $52 |

Rebates paying out in September 2026
Start with the EPA WaterSense Rebate Finder; the EPA does not pay rebates, your utility does, on its own list. Austin, which ran one of the first free-toilet programs in the country, currently lists no toilet rebate.
| Program | Amount | Qualifying toilet | Limits and deadlines |
|---|---|---|---|
| SoCal Water$mart | $40 per toilet, varies by agency and funding | 1.1 gpf or less, MaP-tested list, replacing 1.6 gpf or more | Stealth and Gilpin qualify; the Drake does not |
| Denver Water | Up to $100 | WaterSense, 0.8 gpf or less (list names the Niagara Stealth) | Two per residence in ten years; apply within 90 days |
| City of Phoenix | Up to $75 | WaterSense, 1.28 gpf or less, replacing 3 gpf or more | Two per premise in ten years; single-family; receipt within 60 days |
| Fort Worth SmartFlush | Up to two free WaterSense toilets | Home built before 1994 | Voucher or city-contracted install; while supplies last |
The picks
For the label on a smart toilet, TOTO’s Neorest RS pairs a 1.0 and 0.8 gallon dual flush with a 1,000 gram MaP score and a bidet seat built in; see the best smart toilets.
1. TOTO Drake CST776CEFG: best overall 1.28 gpf single flush
The Drake is the answer when someone asks a plumber which toilet to buy and does not want a conversation. TOTO’s product page lists 1.28 gpf, the Tornado Flush rim, the Cefiontect glaze, universal height, 12-inch rough-in, seat sold separately; the MaP database scores every Drake set built on the C776CEF(G) bowl at 1,000 grams.

What it does well: clears 1,000 grams at 1.28 gallons, the rimless bowl is the easiest to keep clean at this price, and parts are stocked at every supply house.
What you give up: no seat, so budget $40-$70; universal height is chair height, which a short adult may find tall; TOTO flags the set as limited inventory, so supply at any one supplier is thin; and there is no light flush.
Spec line: 1.28 gpf, MaP 1,000, elongated, universal height, 12-inch rough-in. $345.69 at Lowe’s in September 2026. Ferguson stocks it and ships it but publishes no price, so a supply house quote is the way to beat the retail number.
2. TOTO Aquia IV CST446CEMFGN: the dual flush toilet we would actually buy
Most dual flush toilets cut the full flush so hard to make the average that it cannot clear a bowl. TOTO’s product page lists a 1.28 gallon full flush and a 0.9 gallon light flush through the DynaMax Tornado rim in a fully skirted, universal-height body; the MaP database scores it at 800 grams, MaP PREMIUM.

What it does well:
- An 800 gram MaP full flush on a dual flush toilet; most dual flush units in the MaP database have no score at all.
- TOTO sells 10-inch and 14-inch rough-in adapters (about $132 extra), and the top button works with the lid down.
What you give up: no seat, and a skirted install with an adapter and a template, so read our installing a new toilet guide first and our skirted toilet buying guide for the concealed bolts.
Spec line: 1.28 / 0.9 gpf, MaP 800 PREMIUM, elongated, universal height, skirted, 12-inch rough-in. $578.93 at Ferguson and $597.99 at Lowe’s in September 2026.
3. Niagara Stealth 0.8 gpf (bowl N7717, tank N7714): the ultra-high-efficiency pick
The Stealth flushes with 0.8 gallons, 37 percent under the WaterSense limit, using a vacuum-assist chamber instead of a flapper. Niagara’s product page lists bowl N7717, tank N7714, an 800 gram MaP score, MaP PREMIUM, WaterSense certification, and EZ Height (chair height).

What it does well:
- Against a 1.6 gpf baseline it saves two and a half times what a 1.28 gpf toilet does, and it is the only pick here that qualifies for the 0.8 gpf rebates.
- No flapper, so the most common cause of a running toilet is designed out, along with the flapper slap and the long refill hiss that go with it.
What you give up: drainline carry. In an older house with a long run of 3-inch line, this is the toilet installers tell us gets called back. The Lowe’s listing (model 77001WHCO1) has no seat; Home Depot’s all-in-one kit with a seat is 77000WHAI1, $179-$199 in our under-$300 guide in July 2026, but MaP lists that all-in-one build at 600 g, not 800 g, so the N7717 kit is the one that earns this pick’s score.
Spec line: 0.8 gpf vacuum-assist, MaP 800 PREMIUM, elongated, chair height, 12-inch rough-in. $228.22 at Lowe’s in September 2026.
4. American Standard Cadet PRO 215AA104.020: best value name-brand
This is the toilet a supply house hands a plumber who needs twelve by Friday. American Standard’s product page lists 1.28 gpf, a 3-inch flush valve, chair height, elongated bowl, EverClean glaze, 12-inch rough-in, and a limited lifetime warranty on the china with five years on parts; the MaP database scores the 215AA104 (3517A101 bowl, 4188A104 tank) at 1,000 grams, and Lowe’s lists the same model number under the Cadet 3 name.

What it does well: the 3-inch flush valve dumps the tank faster than a 2-inch valve, which is a big part of the 1,000 gram score, and its flappers and fill valves are stocked everywhere.
What you give up: a plain two-piece with an exposed trapway and rim holes, so it takes more scrubbing than a Drake, and no seat.
Spec line: 1.28 gpf, MaP 1,000, elongated, chair height, 3-inch flush valve, 12-inch rough-in. $303.55 at Ferguson and americanstandard-us.com (list $467), $317.23 at Lowe’s, September 2026.
5. PROFLO Gilpin PFGPC412PAUHETWHA: the pressure-assist pick for long drain runs
Pressure-assist toilets use a sealed air vessel in the tank to push water into the bowl harder than gravity can. Buy one for the basement bath at the end of a long, flat drain run, or for the toilet in the house that gets plunged most; the trade is noise on every flush. Name-brand units have mostly left retail, which leaves Ferguson’s PROFLO house brand: the Kohler K-3519 Highline pressure-assist is still on a 2024 spec sheet with no retail listing behind it.
What it does well: pressure-assist drainline carry at 1.0 gpf, the combination that gets a basement bath off the plunger, and MaP PREMIUM, so it qualifies for the 1.1 gpf rebates such as SoCal’s; it is also in stock and shipping while the name-brand pressure-assist units have thinned out of retail.
What you give up: noise, every flush. Parts are the vessel and its cartridge, not the flapper kit every hardware store carries, and it is a house brand.
Spec line: 1.0 gpf pressure-assist on an EcoFlush vessel, MaP 1,000 PREMIUM, elongated, 17-inch bowl height, 3-inch flush valve, 2-inch glazed trapway, 12-inch rough-in (10-inch version PFGPC410PAWHA). PROFLO’s spec sheet builds it from the PF1603PAWH bowl and the PF1612PAWHA tank. $554.48 at Ferguson in September 2026.
What you need before buying
Measure the rough-in from the finished wall to the center of the closet bolts; every pick is a 12-inch toilet with 10-inch options on the Drake, Gilpin, and Aquia IV, which also goes to 14. Our rough-in guide covers the measurement. Measure height too: universal, chair, comfort, and EZ Height all land near 16 to 17.5 inches to the rim, which reaches the 17 to 19 inch ADA range once a seat is on; the ADA-compliant toilet guide walks through it. For pressure-assist, measure static pressure with a $10 hose-bib gauge before you commit: Kohler’s spec sheet for its 1.0 gpf pressure-assist Highline calls for a 35 psi minimum, and PROFLO publishes no figure for the Gilpin’s EcoFlush vessel. Confirm the exact model in the MaP search before paying, because manufacturers reuse family names across 1.28, 1.6, and 0.8 gpf versions, and a retail name often scores under its component numbers: Home Depot’s Glacier Bay N2428E, under $110, is in the database through its 331-725B or N2316EB-17 bowl on the N2428T tank, at 1,000 grams.
What this guide will not recommend
WaterSense toilets with no MaP entry. The Kohler Highline Curve “Complete Solution” K-31089-0 is $199 at Lowe’s with a soft-close seat in the box, and no MaP row carries that model number. It may flush fine; it has not shown us the number under the name it is sold as, so ask Kohler for the bowl and tank numbers and look those up before you buy.
Tank displacement bags, bricks, and bottles in a 3.5 gpf tank. The bowl was designed around 3.5 gallons of siphon; starve it and you get a double flush that uses more water than you started with. Same answer for bending the float arm down and for dual-flush retrofit kits.
The American Standard Cadet pressure-assist 2467100.020. It still turns up in retail search results, but American Standard’s own page has it unavailable for sale, the bowl-only SKU discontinued, and every replacement tank out of stock. Buy a toilet whose maker will still sell you a tank.
FAQ
Will a 1.28 gpf toilet clog more than my old 1.6?
Not if you buy by MaP score. The first 1.6 gpf toilets of the mid-1990s earned the low-flow reputation because manufacturers shrank the tank without redesigning the bowl; a 1.28 gpf toilet at 800 to 1,000 grams clears more than most of those did.
Should I replace a working 1.6 gpf toilet to save water?
Only with a rebate or another reason. Moving three people from 1.6 to 1.28 gpf saves $22 to $52 a year in our five cities, so a $304 toilet takes 6 to 14 years to pay back; moving to 0.8 gpf saves $55 to $129 a year, two to four years for a $228 Stealth.
What is the difference between WaterSense and HET?
HET (high-efficiency toilet) is an industry term for anything at 1.28 gpf or less. WaterSense is the EPA label, which requires third-party certification and the 350 gram test. Rebate programs almost always require the label, not the term.
Is a 0.8 gpf toilet safe for an old house?
It depends on the drain. A short run into a 4-inch stack is fine; a long horizontal run of 3-inch cast iron on a low slope is where 0.8 gallons leaves solids behind. If unsure, choose 1.28 gpf and give up $33 to $78 a year.
Are dual flush toilets worth it?
Only if the light flush gets used; otherwise you have paid a premium for a 1.28 gpf toilet. Check the full-flush figure before you buy, because the label still averages the two flushes and a 1.6 gallon full flush can wear it. The Aquia IV CST446CEMFGN is the one we trust: 1.28 gallons on the full flush and 800 grams on MaP.
What is the best flushing toilet with the WaterSense label?
By MaP score, the TOTO Drake CST776CEFG and the American Standard Cadet PRO 215AA104.020 both reach 1,000 grams at 1.28 gpf; for a long, flat drain run, the pressure-assist PROFLO Gilpin PFGPC412PAUHETWHA does the same at 1.0 gpf.
Sources & references
- EPA WaterSense: residential toilets and how the WaterSense calculator works.
- EPA WaterSense Rebate Finder; program pages for SoCal Water$mart, Denver Water, City of Phoenix, Fort Worth SmartFlush, and Austin Water.
- MaP Testing: WaterSense and the 350 gram requirement, MaP FAQ, MaP PREMIUM, and the MaP search database.
- Rate schedules: NYC Water Board FY2027, LADWP Schedule A, Austin Water and its 2025-2026 rate sheet, Phoenix rates and the July 2026 sewer schedule, and Atlanta Watershed Management.
- Manufacturer pages: TOTO Drake CST776CEFG, TOTO Aquia IV CST446CEMFGN, TOTO Neorest RS, Niagara Stealth, American Standard Cadet PRO 215AA104.020, the PROFLO Gilpin spec sheet, and the Kohler K-3519 spec sheet.
- Retailer pages for prices: the Ferguson pages linked in each pick, and Lowe’s pages for the Niagara Stealth and Cadet 215AA104.020.